Raket Roof Rack – 4 Door

SKU: RRR-4D
Out of stock

$2,395.00

Add to Wishlist
Add to Wishlist

This RAKET rack system is built for the 2021+ Ford Bronco (4 door). The aluminum basket is light at 50lbs and designed for use as a basket or a flat surface platform (see pictures).

Out of stock

Did you like this product? Add to favorites now and follow the product.

Add to Wishlist
Add to Wishlist

Low Prices

Price match guarantee

Guaranteed Fitment.

Always the correct part

In-House Experts.

We know our products

Easy Returns.

Quick & Hassle Free

Description

This RAKET rack system is built for the 2021+ Ford Bronco (4 door). The aluminum basket is light at 50lbs and designed for use as a basket or a flat surface platform (see pictures).

To ensure a seamless installation, this order includes all components, hardware, sockets and fasteners.

 

  • One (1) Front Assembly (20 lbs)
  • Two (2) Side Brackets (10 lbs)
  • One (1) Rear Tower Assembly (30 lbs)
  • MOLLE Panels pre-cut on Rear Tower
  • One (1) 48″ x 66″ Aluminum Basket (3″ top to bottom) (50lbs)
  • Two (2) DELRIN and Stainless Steel slide rails
  • Fastening Bolts
  • Two (2) precut PPF Bracket Gaskets
  • Standard Textured Matte Black Powder Coat

Reviews

There are no reviews yet.

Be the first to review “Raket Roof Rack – 4 Door”

Your email address will not be published. Required fields are marked *

Quick Comparison

SettingsRaket Roof Rack - 4 Door removeLobo Offroad HNT Front Bumper | Bronco removeLobo Offroad HNT Rear Bumper | Bronco removeUBK Front Door Molle Pockets Set - W/ Velcro removeUBK Front Door Molle Pockets Set - W/O Velcro removeLobo Offroad ACC Relocation Bracket | Bronco remove
NameRaket Roof Rack - 4 Door removeLobo Offroad HNT Front Bumper | Bronco removeLobo Offroad HNT Rear Bumper | Bronco removeUBK Front Door Molle Pockets Set - W/ Velcro removeUBK Front Door Molle Pockets Set - W/O Velcro removeLobo Offroad ACC Relocation Bracket | Bronco remove
Image
SKURRR-4DHNC-FB-Bronco LoboHNT-RB-Bronco LoboBR-MD-VD Vel OffBR-MD-NV Vel OffF6-35-310B Lobo
Rating
Price$2,395.00$1,395.00$1,250.00$139.99$119.99$99.00
Stock
Out of stock
In Stock
In Stock
In Stock
In Stock
In Stock
AvailabilityOut of stockIn StockIn StockIn StockIn StockIn Stock
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

DescriptionThis RAKET rack system is built for the 2021+ Ford Bronco (4 door). The aluminum basket is light at 50lbs and designed for use as a basket or a flat surface platform (see pictures).The WNC Front Bumper is designed to incorporate the High-N-Tight design ethos of our HNT series bumpers, but with accomodations for mounting a winch on/in the bumper while maintaining as much ground clearance and approach angle as possible.The HNT Rear Bumper is designed to carry the High-N-Tight design ethos of our HNT series bumpers to the rear of the Bronco maintaining as much ground clearance and departure angle as possible.
UBK's Ford Bronco front door MOLLE pockets paid made of 1/8" steel and powder coated black. Available with or without velcro.
UBK Ford Bronco front door MOLLE pockets paid made of 1/8" steel and powder coated black. Available with or without velcro.
For Broncos equipped with adaptive cruise control (ACC), this bracket is used to relocate the ACC sensor module up to the area behind the grille.
ContentThis RAKET rack system is built for the 2021+ Ford Bronco (4 door). The aluminum basket is light at 50lbs and designed for use as a basket or a flat surface platform (see pictures). To ensure a seamless installation, this order includes all components, hardware, sockets and fasteners.  
  • One (1) Front Assembly (20 lbs)
  • Two (2) Side Brackets (10 lbs)
  • One (1) Rear Tower Assembly (30 lbs)
  • MOLLE Panels pre-cut on Rear Tower
  • One (1) 48″ x 66″ Aluminum Basket (3″ top to bottom) (50lbs)
  • Two (2) DELRIN and Stainless Steel slide rails
  • Fastening Bolts
  • Two (2) precut PPF Bracket Gaskets
  • Standard Textured Matte Black Powder Coat

HNT FRONT BUMPER

The HNT Front Bumper is designed to provide everything the avid four-wheeler needs, and nothing they don’t. It is engineered as a high clearance, light-weight but tough bumper that meets or exceeds the factory bumper’s clearance at every angle. LOBO Off-Road’s High-N-Tight Design Ethos guided our product development process to result in the highest clearance bumper possible without performing major surgery to the Bronco’s frame. The bumper tucks up severely as it extends outboard of the frame rails, preserving enough structural thickness to protect the Bronco’s grille while allowing maximum clearance for tires to access rock obstacles to apply traction. The HNT philosophy also applies to weight and materials used, as it pushed us to maintain the lowest center of gravity possible. That means keeping weight to a minimum. We achieved that by using 1/8-inch thick plate steel for the bumper’s outer shell. This is thicker material than the factory Modular steel bumper, but lighter weight than most heavy aftermarket bumpers which are made of thicker plate. But we did provide the beef where it counts, as the bumper shell mounts over our beefy Frame Brackets, which are made of 3/16″ thick plate steel. The frame brackets provide the structural rigidity required to support the bumper’s Recovery Tabs, Outrigger Braces for the bumper shell and a rigid attachment points for the HNT Hidden Winch Skid Plate, our forthcoming non-winch skid, or the factory skid. The weight of this beefy under-structure is concentrated where it is needed, and absent where it would be a waste. The 1″ thick CNC machined Extreme Duty Recovery Tabs are fully incorporated into the beefy structure of the Frame Brackets and protrude through CNC laser-cut slots in the Bumper Shell. These Recovery Tabs accept standard heavy duty D-ring shackles and soft shackles, and are fully boxed and braced to handle the most severe recovery duty or even tow-bar attachments for flat towing. The Bumper Shell’s center and outboard cut-outs are filled with removable CNC laser-cut mesh panels that may be painted a contrasting color by the end-user, if desired. The top-center cut-out will accommodate a variety of off-road lighting configurations (more information coming soon). The HNT Front Bumper is designed to be fully compatible with all currently available sensors and electronics, including parking sensors, panic-stop warning sensors and adaptive cruise control. When ordering choose between parking sensor mounts or parking sensor delete plugs from the options above, according to how your Bronco is equipped. A mounting bracket for installing up to four Rigid Industries DXL LED light pods (or similar) in the center section of the bumper will be sold separately (coming soon). The HNT Front Bumper is made entirely of 1/8″ and 3/16″ thick mild steel plate, CNC laser cut, precision brake-formed, and professionally fixture welded for a consistent fit and finish. Premium hardware and detailed installation instructions are included. HNT Front Bumper comes standard with a durable multi-stage semi-gloss black powder coat finish. For those who wish to paint or coat it a custom color, the bumper may be special-ordered raw (please allow extra production time).

THE HNT DESIGN ETHOS

LOBO Off-Road’s proprietary High-N-Tight Design Ethos guides the product development of this and every component in our HNT Series. The HNT Ethos strives to tuck every facet of the bumper, slider, skid or component as close as possible to the vehicle components it protects, in order to yield the maximum clearance possible to slip past the tightest obstacles. While HNT Series components are built to take a hit if necessary, they are designed to minimize the risk of contact in the first place. HNT design language also incorporates low-drag surfaces with ramp angles and facets for guiding the vehicle up and over obstacles when contact is made, rather than hanging up on sharp corners and protrusions. While the HNT Design Ethos is silent on the subject of aesthetics, we believe that adhering to the High-N-Tight philosophy has the unintended consequence of yielding the best looking armor products possible.

HNT FRONT BUMPER

The HNT Front Bumper is designed to provide everything the avid four-wheeler needs, and nothing they don’t. It is engineered as a high clearance, light-weight but tough bumper that meets or exceeds the factory bumper’s clearance at every angle. LOBO Off-Road’s High-N-Tight Design Ethos guided our product development process to result in the highest clearance bumper possible without performing major surgery to the Bronco’s frame. The bumper tucks up severely as it extends outboard of the frame rails, preserving enough structural thickness to protect the Bronco’s grille while allowing maximum clearance for tires to access rock obstacles to apply traction. The HNT philosophy also applies to weight and materials used, as it pushed us to maintain the lowest center of gravity possible. That means keeping weight to a minimum. We achieved that by using 1/8-inch thick plate steel for the bumper’s outer shell. This is thicker material than the factory Modular steel bumper, but lighter weight than most heavy aftermarket bumpers which are made of thicker plate. But we did provide the beef where it counts, as the bumper shell mounts over our beefy Frame Brackets, which are made of 3/16″ thick plate steel. The frame brackets provide the structural rigidity required to support the bumper’s Recovery Tabs, Outrigger Braces for the bumper shell and a rigid attachment points for the HNT Hidden Winch Skid Plate, our forthcoming non-winch skid, or the factory skid. The weight of this beefy under-structure is concentrated where it is needed, and absent where it would be a waste. The 1″ thick CNC machined Extreme Duty Recovery Tabs are fully incorporated into the beefy structure of the Frame Brackets and protrude through CNC laser-cut slots in the Bumper Shell. These Recovery Tabs accept standard heavy duty D-ring shackles and soft shackles, and are fully boxed and braced to handle the most severe recovery duty or even tow-bar attachments for flat towing. The Bumper Shell’s center and outboard cut-outs are filled with removable CNC laser-cut mesh panels that may be painted a contrasting color by the end-user, if desired. The top-center cut-out will accommodate a variety of off-road lighting configurations (more information coming soon). The HNT Front Bumper is designed to be fully compatible with all currently available sensors and electronics, including parking sensors, panic-stop warning sensors and adaptive cruise control. When ordering choose between parking sensor mounts or parking sensor delete plugs from the options above, according to how your Bronco is equipped. A mounting bracket for installing up to four Rigid Industries DXL LED light pods (or similar) in the center section of the bumper will be sold separately (coming soon). The HNT Front Bumper is made entirely of 1/8″ and 3/16″ thick mild steel plate, CNC laser cut, precision brake-formed, and professionally fixture welded for a consistent fit and finish. Premium hardware and detailed installation instructions are included. HNT Front Bumper comes standard with a durable multi-stage semi-gloss black powder coat finish. For those who wish to paint or coat it a custom color, the bumper may be special-ordered raw (please allow extra production time).

THE HNT DESIGN ETHOS

LOBO Off-Road’s proprietary High-N-Tight Design Ethos guides the product development of this and every component in our HNT Series. The HNT Ethos strives to tuck every facet of the bumper, slider, skid or component as close as possible to the vehicle components it protects, in order to yield the maximum clearance possible to slip past the tightest obstacles. While HNT Series components are built to take a hit if necessary, they are designed to minimize the risk of contact in the first place. HNT design language also incorporates low-drag surfaces with ramp angles and facets for guiding the vehicle up and over obstacles when contact is made, rather than hanging up on sharp corners and protrusions. While the HNT Design Ethos is silent on the subject of aesthetics, we believe that adhering to the High-N-Tight philosophy has the unintended consequence of yielding the best looking armor products possible.   Additional information
Weight 74 lbs
Dimensions 76 × 18 × 15 in
Sensor Config Park Sensor Mounts, Park Sensor Hole Plugs
  • High-N-Tight Design Ethos
  • 3/16″ steel backbone for structural strength
  • 1/8″ steel bumper shell for light weight
  • Integrated recovery shackle mounts
  • Black powder coat finish
  • Proudly Made in the U.S.A.

HNT REAR BUMPER

The HNT Rear Bumper is designed to carry the High-N-Tight design ethos of our HNT series bumpers to the rear of the Bronco maintaining as much ground clearance and departure angle as possible. The HNT Rear Bumper tucks up as tightly as possible to the body of the Bronco to help it sneak past rocks and obstacles on the tightest trails. The bumper has an oversized spare tire recess to accommodate swing-gate mounted spare tires up to 40″ in diameter. Extreme duty recovery shackle tabs are integrated into the beefy frame mounts. In addition to high clearance, we’ve worked to achieve the lightest weight and lowest center of gravity possible. We achieved that by using 1/8-inch thick plate steel for the bumper’s outer shell. This is thicker material than the factory Modular steel bumper, but lighter weight than most heavy aftermarket bumpers which are made of thicker plate. But we did provide the beef where it counts, as the bumper shell mounts over our beefy Frame Brackets, which are made of 3/16″ thick plate steel. These components provide the structural rigidity required to support the bumper as well as the bumper’s Recovery Tabs. They also incorporate Outrigger Braces for the bumper shell. The weight of this beefy under-structure is concentrated where it is needed, and absent where it would be a waste. The 1″ thick CNC machined Extreme Duty Recovery Tabs are fully incorporated into the beefy structure of the Frame Brackets and protrude through CNC laser-cut slots in the Bumper Shell. These Recovery Tabs accept standard heavy duty D-ring shackles and soft shackles, and are fully boxed and braced to handle the most severe recovery duty. The Bumper Shell’s outboard cut-outs are filled with removable CNC laser-cut mesh panels that may be painted a contrasting color by the end-user, if desired. The HNT Rear Bumper is designed to be fully compatible with parking sensors. When ordering choose between parking sensor mounts or parking sensor delete plugs from the options above, according to how your Bronco is equipped. The HNT Rear Bumper is made entirely of 1/8″ and 3/16″ thick mild steel plate, CNC laser cut, precision brake-formed, and professionally fixture welded for a consistent fit and finish. Premium hardware and detailed installation instructions are included. HNT Rear Bumper comes standard with a durable multi-stage light-textured black powder coat finish Note that in the interest of designing the highest clearance rear bumper possible, there is no provision for mounting the license plate. The Lobo Off-Road Rear License Plate Mount or other aftermarket relocation mount will have to be used. Also note that the Lobo logo that is cut into the center of the step-well area is backed by a removable plate that comes powder coated in the same black finish as the bumper, for those who prefer the branding to not be prominent. For those who would like to customize it with an accent color or match the Bronco’s body color, the plate may be removed and painted or vinyl-wrapped prior to installation. We have done this in the images shown with the red WildTrak Bronco.

THE HNT DESIGN ETHOS

LOBO Off-Road’s proprietary High-N-Tight Design Ethos guides the product development of this and every component in our HNT Series. The HNT Ethos strives to tuck every facet of the bumper, slider, skid or component as close as possible to the vehicle components it protects, in order to yield the maximum clearance possible to slip past the tightest obstacles. While HNT Series components are built to take a hit if necessary, they are designed to minimize the risk of contact in the first place. HNT design language also incorporates low-drag surfaces with ramp angles and facets for guiding the vehicle up and over obstacles when contact is made, rather than hanging up on sharp corners and protrusions. While the HNT Design Ethos is silent on the subject of aesthetics, we believe that adhering to the High-N-Tight philosophy has the unintended consequence of yielding the best looking armor products possible.

Additional information

Weight 74 lbs
Dimensions 76 × 18 × 15 in
Sensor Config Park Sensor Mounts, Park Sensor Hole Plugs
UBK's Ford Bronco front door MOLLE pockets paid made of 1/8" steel and powder coated black, with Velcro.  
Lead times are 4-6 weeks from the time your order is placed.
UBK Ford Bronco front door MOLLE pockets paid made of 1/8" steel and powder coated black, without Velcro.  
Lead times are 4-6 weeks from the time your order is placed.
  • Relocates Adaptive Cruise Control unit
  • Black powder coat finish
  • Proudly Made in the U.S.A.
For Broncos equipped with adaptive cruise control (ACC), this bracket is used to relocate the ACC sensor module up to the area behind the grille. This is useful when installing front bumpers that require relocation in order to retain ACC functionality, such as the Lobo Off-Road WNC Front Bumper and HNT Front Bumper.

Additional information

Weight 3 lbs
Dimensions 12 × 5 × 2 in
 
WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information